Forum Replies Created
-
AuthorPosts
-
22 March 2017 at 9:03 pm #310399
Great! Thank you all for your opinion.
I’ll put the bench to the right and the vice on the inside next to the left leg.
cheers21 March 2017 at 2:16 pm #310355Ok, thank you!
I’ll put the bench to the right and the vice on the left side.12 March 2017 at 6:49 pm #310085Tank you for the quick replies!
@dbockel2 havent thougt about contraction yet, thanks!
@rickgugg i’ll cut a housing dado in the well board so i get 2″ to 2.2″ depht. I think that should be comparable with your bench. The idea of undercutting the edges sounds reasonable to me.
@dusty32309 i will not glue the top to the legs but to the aprons. Thats what i meant. i also built the bench to be mobile! Seems to me, the molding along the wellboard is reasonable too.The pictures show the actual stage.
With your suggestions i’ll be able to finish the bench the way i’ll be satisfied.
cheers
Attachments:
You must be logged in to view attached files.12 March 2017 at 6:08 pm #310083Hello draske,
i started to built the bench a few weeks ago. To plane, i also used a #4. My advise, keept the plane sharp and cut two simple sticks. They’ll do it als winding-sticks.
It takes some time to plane the tabletop down but its also a good practise.cheers!
-
AuthorPosts