Bathroom Cabinet: Episode 5
Paul is now ready to chop all the door mortises using the guide. Then the tenons are individually fit to the mortises and everything is ready for the glue up. Once cured, the door is cleaned up and fitted to the cabinet.
Paul is now ready to chop all the door mortises using the guide. Then the tenons are individually fit to the mortises and everything is ready for the glue up. Once cured, the door is cleaned up and fitted to the cabinet.
Fitting castors to your bench makes it much easier to move your bench around the shop with minimal effort.
The door is put together using Paul’s mortise and tenon method. The first step is to ensure accurate and crisp layout of the tenons and cut the rebates. Then the tenons are pared to consistent thickness using the chisel and router then sawn to length.
After checking all the joinery, Paul lays out and shapes the various round-overs. Then the retaining strips for the back are fixed in place before the carcass is glued up. The adjustable shelves are then fitted.
These shelves keep Paul’s sharpening stones close at hand for convenience and separate them from the rest of his tools as they can get dirty. Follow along to fit solid useful shelves at the end of your bench.
The mortises and tenons and cut using Paul’s method to ensure tight joints and parallel surfaces. Then the retainer grooves and back panel are cut and fit in place to complete the carcass construction.
With the stock selected, Paul gets started with the main carcass of the cabinet. The first step is to rebate the grooves, then lay out and cut the housing dadoes. Then the stub tenons on the cross rails and associated mortises can be cut.
This newly designed bathroom cabinet can be adapted for many uses. It features a mortise and tenoned door with mirror panel, adjustable and removable shelves and a hand turned cabinet door knob.
This additional tool well is very handy for storing and organising tools you want to keep off the bench but close at hand.
With everything fully assembled, the joinery is pared, planed and scraped flush. Then the ends can be shaped with the coping saw.